Multifloor
Multifloor is structural by design and can be fully bonded, floated or secret nailed to battens / joists, flooring grade ply and chipboard. With a bevel edge, Multifloor is available as unfinished, lacquered, oiled, brushed & oiled and smoked in both Oak and Walnut species.
Multifloor is both diverse in appearance and installation.
20mm thick with either a 6mm Oak or Walnut veneer and specifically designed to give a solid floor appearance upon installation.
This product, whilst generally compatible with most underfloor heating systems, is not guaranteed when installed over one. This is because of the diverse range of heating systems available and therefore differing guidelines would need to be issued to cover all models of installation. However, if used over such a system, manufacturers’ guidelines should be strictly adhered.
ZAMORRA Multifloor range
Thickness: 20mm (6.0mm Wear Layer)
Width: 189mm (Fixed)
Length: 1860mm (Fixed)
Moisture content: 7% – 14%
Grade: Natural (White Oak), A/B (Walnut)
Species: White Oak and Walnut
White Oak Finishes:
Lacquered, Unfinished, Oiled, Oiled & Brushed & ‘Thermo’ Unfinished -
Dark (in 180mm width).
Walnut Finishes: Unfinished
Click here to view the White Oak product Technical Sheet
Click here to view the Walnut product Technical Sheet
.JPG "BLACK BOX Multifloor range")
BLACK BOX Multifloor range
Thickness: 20mm (6.0mm Wear Layer)
Width: 180mm (Fixed)
Length: 2200mm (White Oak) 1800mm (Walnut)
Moisture content: 8% – 10%
Grade: Natural (White Oak), A/B/C (Walnut)
Species: White Oak and Walnut
White Oak Finishes: Unfinished, Double Smoked & Oiled
Walnut Finishes: Unfinished
Click here to view the White Oak product Technical Sheet
Click here to view the Walnut product Technical Sheet